Gates can be made to suit most types of fences that I build. I custom make the gate frames myself. I've been making my own gate frames for over 10 years now.  I believe my gate frames are of a superior quality to that of my competitors, that's why I make them myself.  Why are mine better?

I use 30 x 30 mm galvanised steel tubing instead of 25mm like most contractors. I can use 40mm or 50mm at a slight increased cost.

I place extra welds in the frame, welding along the long edges of the hinges, not just the top and bottom.

I weld on all the gate fittings, hinges, drop bolts and pad bolts, not just screw them to the frame.
I spray quality "Galmet" paint over all welded areas to prevent rusting.

I cross brace all of my gate frames with a 30 x 30mm piece to galv tube welded at both ends to prevent any movement in the frame once its installed.

My gates can be clad with anything from palings to hardwood pickets and decking.

I set my gate posts first then make your gate frame to fit into the opening as neatly as possible, unlike a lot of other people who try to save time by doing it the other way around, only to find it doesn't fit well.

I offer several types of screws, galvanized tek, stainless and galvanized countersunk.

All gates come standard with a black ring latch to open and close the gate from front and rear and a pad bolt usually located at the top of the gate to lock the gate from the rear.  Latches can be chrome or brass if need be, at a slight increase in cost.

All double gates come with a drop bolt on each gate to lock them open and closed into the ground. (If you have a concrete drive I usually drill holes into it for these to lock into for you.)

Double gates can be fitted with electric openers and we can get rolling automated gates made also.

I can also fit deadlock keyed locks to gates, I only use "LOCKWOOD" locks, because of their reliability outdoors. Also Lockwood locks are Australian made and I like to use locally made and sourced products where possible to support other Australian companies.